TECHNICAL SHEET - RELIEF (DESIGN - CLASSIC & GRANIT) 3,5 mm (19 12 2013)
29th February 2012 Page 1
Technical Data Sheet
Collection : RELIEF (DESIGN - CLASSIC - GRANIT)
Thickness : 3,5 mm Location : Floor
Features Standard Unity Requirement Results
According to EN 14041 (Essential Characteristics)
Fire Behavior (All colors) EN 13 501-1 Classification -- B fl – s1(*)
Fire Behavior (Black) EN 13 501-1 Classification -- C fl – s1(*)
Slip Resistance EN 13 893 Classification DS (>0,3) DS
Use Classification EN 685 Classification -- 43
According to NF EN 12199 (Specification for homogeneous and heterogeneous rubber floor coverings with relief)
General Requirements
Dimensional Stability EN 434 % 0,4 Conform
Flexibility EN 435 Method A -- No Cracking Conform
Hardness ISO 7619 Shore A 70 Conform
Residual Indentation EN 433 mm ≤ 0,20 Conform
Abrasion Resistance ISO 4649 mm3 ≤ 250 Conform
Color Fastness EN ISO 105-B02 minimum 6 (Blue Scale) Conform
Wear Resistance ISO 34 :1 N/mm >20 Conform
Castor Chair Test EN 425 See Rmq 1 Conform
Optional Properties
Electrical Resistance (Vertical) EN 1081 Ohm -- 3,7 x 1011
Electrostatic propensity EN 1815 kV <2 Conform
Stain Resistance EN 423 See Rmq 2
Slip Resistance (Dry) DIN 51130 Classification -- R9
(*) In glued standing to A1fl or A2fl classified substrates.
Rmq 1: EN 425 – Requirement: No damage on the surface other than minor modifications and no delamination shall occur.
Rmq 2: EN 423 - Resistance depending on concentration and time of action
Subject to variations in color between different baths and technical changes to improve the product
|