We don't usually keep stocks in Australia (but see local stocks below). Most orders are made to order in the factory in France. You can choose any colour and any texture with no minimums. We can air freight and delivery to almost anywhere in Australia with lead times from 1 to 6 weeks.
If you are not in a hurry we can co-load smaller orders with other larger orders we are sea freighting. Lead time is then 10 -16 weeks sea freight depending on size of area, stocks etc. We are getting a lot of domestic orders as home owners are willing to wait if they can get the rubber for about $60m2 cheaper.
We are happy to send samples and brochures to you so you can hold it in your hand and feel and see the quality so you can decide whether Dalsouple rubber flooring is for you. Go to samples page
AVAILABLE STOCKS
There are limited small quantities of stocks available in the factory in France. Some colours in smooth texture up to 10m2 are available and we can get these stocks to anywhere in Australia in a week or two. Some colours in a few textures are available too. Please contact us as to what's available.
Stocks in Melbourne--------------- From time to time, we have stock that has been misordered, or left over, but not very often. Because of the range of 80 colours we don't want to keep stocks.
1/ In stock in Melbourne. ..........18 tiles of DalUni smooth in Blanc Dakota (off-white). These tiles have never been installed but leftover from a job and had yellowed a bit on the edges. We have had them water jet cut so they are like new but slightly smaler than normal at about 1720mm x 650mm x 2.5mm,19.8m2. $80 per tile + registered post (about $40 per 4 tiles) from Melbourne. (We can post a sample to you). We are happy to sell them off in small lots.
2/ Secondhand/used, off-white tiles, 1760mm x 680mm x 2.5mm, about 50 in total. They were installed in an office temporarily for a few months so they have been walked on and have some slight dints and marks. They were polished, but the polish has made them a bit yellowed. We have stripped some of the tiles so they don't look as yellow. We would not recommend them for your house or office, but they could be used for a workshop, under a bench, footstool, bench top, shelf, or garage. These could be glued down or temporarily with a double sided carpet tape. (We can post a sample to you)
$40 per tile + cost of registered post to anywhere in Australia.
We've just loosely laid some tiles temporarily in a room in our house we are renovating, so you can see they are slightly yellowish and not quite white, but overall they look quite good.
3/ 30 x 2m lengths of Dalsouple DalNose rubber stair nosing, colour black, only suitable for bull nose, not square edge stairs.
60 lineal metres. $10 per length +GST + delivery from Melbourne.
Note: colour is black, but whitish silicone release agent can be easily cleaned off with a neutral degreaser.
